ODORx Tabac-Attack

Neutralize and destroy tobacco and cannabis smoke. Works at the molecular level to neutralize and permanently deodorize materials affected by these odors. Can be used on hard or soft surfaces, as an air freshener or added to other cleaning solutions to boost odor control.

ITEMS NEEDED
• ODORx® Tabac-Attack
• Additional products: Thermo55™ Tabac-Attack
• Personal Protective Equipment (PPE) as specified in the Safety Data Sheet (SDS)
• Supplies: adequate supply of clean cloths and a plastic bag for the storage of soiled cloths, measuring cup
• Equipment: Air mover for ventilation, thermal fogging equipment Thermo-Gen™ or Electro-Gen™ Thermal Foggers. (Do not use
Thermo-55 with the Electro-Gen™ 2000 or Electro-Gen 2000C.) Heavy duty extension cords as required to provide power for the
electrical equipment. Do not use cords no more than 25 feet in length.
PROCEDURE
Prepare all Ready-To-Use (RTU) solutions BEFORE entering the worksite. Dilute with water to desired concentration and spray lightly
onto absorbent materials (see cautions below). Apply directly to surfaces coated with tobacco/cannabis residues. Repeat as needed.
For airborne odors mist twice in the upper corners of the room, repeat or expand treatment as needed.
Tabac-Attack is diluted with water when used in the following applications:
• GENERAL PURPOSE AIR FRESHENER: Dilute 2 ounces of concentrate with enough water to make 1 gallon of RTU (16 mL / L).
Spray upwards in a fine mist. Apply routinely for total odor control.
• FURNACE/AIR CONDITIONERS: Dilute 2 ounces of concentrate with enough water to make 1 gallon of RTU (16 mL / L). Wash
interior and spray onto filters periodically for effective odor control.
• AUTOMOTIVE AND RV USES: Dilute 2 ounces of concentrate with enough water to make 1 gallon of RTU (16 mL / L). Spray
lightly on to absorbent surfaces, spray into heater/air conditioner exhaust ports periodically for effective odor control. Note a
convenient approach is to add ½ ounce of concentrate to a quart spray dispenser bottle, fill to the mark with water and attach a
trigger sprayer.
Tabac-Attack is used as a cleaning additive in these situations:
• FIBER CLEANING: Add 1 ounce of concentrate per gallon of extraction or shampoo solution (8 mL / L). Reapply after cleaning for
additional freshening effect. To control stronger odors, double the concentration.
• MOPPING OR WATER BASED CLEANING SOLUTIONS: Add 1 ounce of concentrate per gallon (8 mL / L) to water based
mopping solution. To control stronger odors, double the concentration.
• LAUNDRY: Add 1 ounce per 8 pound (8 mL per 3.6 kg) load to remove odors and freshen. For stronger odors, double the
concentration.
• TRUCK MOUNTED CLEANING EQUIPMENT: Add 4 ounces of concentrate for each gallon of solution in the detergent holding
tank. (32 mL /L)
Tabac-Attack can be used full strength in these limited applications:
• WASTE RECEPTACLES: Apply full strength before cleaning. Spray lightly with full strength deodorant periodically for effective
odor control.