ODORx Liqui-Zone

Severe odor control. Tackles tough odors through oxidation. Highly effective on dead body odors, skunk odors, charred wood and more.

ITEMS NEEDED
• Odor Control products: ODORx Liqui-Zone™, OdorX Last Resort™ (optional)
• Personal Protective Equipment (PPE) as specified in the Safety Data Sheet (SDS)
• Supplies: adequate supply of clean cloths and a plastic bag for the storage of soiled cloths, measuring cup
• Equipment: Pressure sprayer and / or ULV fogger
PROCEDURE FOR GENERAL ODOR CONTROL
To prepare a ready to use (RTU) solution, mix 6.5 ounces of concentrate with enough water to make one gallon (50 mL / L). Be sure
that the sprayers and other containers are clean. Even small amounts of contamination, even a staple, will react with the product and
reduce effectiveness.
APPLICATION DETAILS:
1) For best results apply RTU Liqui-Zone to a precleaned surface
2) RTU Liqui-Zone solutions may be applied by spraying or ultra low volume fogging.
3) Allow to dry thoroughly before use.
4) Reapply RTU Liqui-Zone if odor persists.
5) When applying Liqui-Zone to fabrics, use a fine mist.
Pretesting: because Liqui-Zone is a strong oxidizing agent, it is capable of damaging sensitive surfaces such as textile dyes. Be sure to
pre-test.
PROCEDURE FOR DEATH SCENE / SKUNK / SEVERE PET ODORS
To prepare ready to use odor suppressing decontaminant for spray application, add the following to an empty gallon (4 L) container:
• 1-2 ounces (60 mL) Last Resort
• 8 ounces (240 mL) of Liqui-Zone
• Add enough warm tap water to make one gallon (4 L)
Use a pressure sprayer to apply this solution directly onto contaminated surfaces